头像

赖焕新

上海市浦江人才计划

教授

博士生导师、硕士生导师

机械与动力工程学院

联系方式

办公地址:

Email: hlai@ecust.edu.cn

扫一扫打开我的个人主页

个人简介

赖焕新  教授  博士生导师,

长期致力于流体机械(泵、风机、压缩机、阀门;流场模拟与诊断、节能减排、流体噪声的控制技术),流动与传热问题的高性能计算(先进的数值算法、CFD软件设计),新能源科学与技术基础(锂电池热管理、燃料电池水热管理、风力机气动力学等),湍流与流体声学(大涡模拟、航空发动机喷流噪声的基础研究),工程流体力学的交叉科学问题(能源化工多相流、自由表面、多孔介质、非牛顿流体等)的研究。曾获上海市科学技术进步一等奖。

研究领域

  • 1.流体机械
  • 2.流动与传热问题的高性能计算
  • 3.新能源科学与技术基础
  • 4.湍流与流体声学
  • 5.工程流体力学的交叉科学问题

科研成果

项目名称项目类型
显示更多

学术成果

  • 1.Correlation-enhanced short-time analysis of coherent structures for acoustic bursts in subsonic jets. Physics of Fluids,Physics of Fluids,2024
  • 2.Comparative study of flow-channel layout schemes in liquid cooling plates of a prismatic battery module,Applied Thermal Engineering ,2024
  • 3.Kinematic analyses of wave-packet structures in non-isothermal jet flows: Effects of length scales,Physics of Fluids,2023
  • 4.Comparison of Cavitation in Two Axial-Flow Water Jet Propulsion Pumps. ,Processes,2023
  • 5.Correlation analysis of flow and sound in non-isothermal subsonic jets based on large eddy simulations,Physics of Fluids,2022
  • 6.Coherent Structures in a Compressible Turbulent Plane Jet.,Physics of Fluids,2021
  • 7.Study of multi-mode forcing effects on coherent structures of flow transition in a compressible jet,AIP Advances,2021
  • 8.Flow Developing Properties of a Compressible Parallel Jet, AIP Advances,2021
  • 9.Fluid flow effects on the degradation kinetics of bioresorbable polymers,COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING,2021
  • 10.Numerical Study of Turbulence and Noise in Chevrons Nozzles at the Mach Number Equal to 0.25,Fluid Dynamics,2021
  • 11. Coupled prediction model of liquid-cooling based thermal management system for cylindrical lithium-ion module,Applied Thermal Engineering,2020
  • 12.Effects of discharge rate on electrochemical and thermal characteristics of LiFePO4/ graphite battery,Applied Thermal Engineering,2019
  • 13.Large Eddy Simulation of Compressible Parallel Jet Flow and Comparison of Four Subgrid-Scale Models,Journal of Applied Fluid Mechanics,2019
  • 14.Electrochemical-Thermal Coupled Investigation of Lithium Iron Phosphate Cell Performances under Air-Cooled Conditions,Applied Thermal Engineering,2019
  • 15.Study of Passive Control of Jet Noise by Blind Holes on Nozzle Inner Wall,2019
  • 16.Numerical Study of Controlling Jet Flow and Noise using Pores on Nozzle Inner Wall,Journal of Thermal Science,2018
  • 17.The Simulation of non-Newtonian Power-law Fluid Flow in a Centrifugal Pump Impeller,Journal of the Chinese Society of Mechanical Engineers,2017
  • 18.Study of passive control of jet noise by blind holes on nozzle inner wall,2017
  • 19.Numerical Study of Unsteady Flows with Cavitation in a High-Speed Micro Centrifugal Pump,Journal of Thermal Science,2017
  • 20.Comparison of Five Two-equation Turbulence Models for Calculation of Flow in 90° Curved Rectangular Ducts,Journal of Applied Fluid Mechanics,2016
  • 21.Numerical Investigation on the Self-Induced Unsteadiness in Tip Leakage Flow of a Micro-Axial Fan Rotor,Journal of Thermal Science,2015
  • 22.Experimental Study of Pseudoplastic Fluid Flows in a Square Duct of Strong Curvature,Journal of Thermal Science,2014
  • 23.Noise Controlling Using Porous Stabilizers in a Cross-Flow Fan,2012
  • 24.A Pressure-Correction Procedure with High-Order Schemes, International Journal of Numerical Methods for Heat and Fluid Flow,2011
  • 25.Attenuation of cross-flow fan noise using porous stabilizers,International Journal of Rotating Machinery,2011
  • 26.Integral Solution of a Forced Laminar Boundary Layer over an Isothermal Plate Embedded in a Porous Medium,International Journal of Nonlinear Sciences & Numerical Simulation,2009
  • 27.Large-Eddy Simulation and Control of Cavity Aeroacoustics Using Porous Media Inserts,Flow, Turbulence and Combustion,2008
  • 28.A three-dimensional hybrid LES-acoustic analogy method for predicting open cavity noise,Flow, Turbulence and Combustion,2007
  • 29.Numerical simulation of time-dependent heat and fluid flows inside and around single rising bubbles using a moving boundary-fitted mesh system,2007
  • 30.Large-Eddy Simulation and Control of Cavity Aeroacoustics,2006
  • 31.A hybrid LES-Acoustic analogy method for computational aeroacoustics.in Direct and Large-Eddy Simulation VI: ERCOFTAC SERIES (EUROPEAN RESEARCH COMMUNITY ON FLOW, TURBULENCE AND COMBUSTION),2006
  • 32.Acoustic Source and Near Field of Three-Dimensional Compressible Flow over an Open Cavity,2005
  • 33.Three-Dimensional Effects in Compressible Open Cavity Flows,2005
  • 34.Direct numerical simulation of three-dimensional compressible flows in an open cavity,RECENT ADVANCES IN FLUID MECHANICS,2004
  • 35.Numerical Study of Heat and Mass Transfer in Rising Inert Bubbles Using a Conjugate Flow Model,2004
  • 36.Calculation Procedure for Conjugate Viscous Flows About and Inside Single Bubbles,2003
  • 37.Recent advances in computational modelling of multi-phase transport phenomena in energy engineering,ENERGY AND ENVIRONMENT,2003
  • 38.A Calculation Procedure with Multi-Block Iteration and Moving Mesh for Heat and Fluid Flows in Complex Time-Dependent Geometries,2002
  • 39.Numerical Study of Conjugate Steady Viscous Flow About and Inside a Spherical Bubble,Heat Transfer 2002,2002
  • 40.Numerical Analysis of Fluid Flows inside and around A Liquid Drop Using An Incorporation of Multi-Block Iteration and Moving Mesh,2002
  • 41.Numerical Analysis of Fluid Flow and Heat Transfer in Complex Time-Dependent Geometries,2001
  • 42.The effect of choosing dependent variables and cell-face velocities on convergence of the SIMPLE algorithm using non-orthogonal grids,International Journal of Numerical Methods for Heat & Fluid Flow,2001

荣誉及奖励


获奖名称获奖级别获奖时间
上海市科学技术进步奖一等奖2017
显示更多

出版著作

社会兼职

主讲课程

  • 工程流体力学,
  • 流动与传热数值计算,
  • 高等流体力学,

教育经历

  • 1987-09 至 1991-08,华中理工大学,大学本科
  • 1991-09 至 1994-08,西安交通大学,硕士研究生
  • 1994-09 至 1997-11,华中理工大学,博士研究生
  • 2000-03 至 2003-03,英国诺丁汉特伦特大学,博士研究生

工作经历

  • 1997-12 至 1999-11,中国科学院工程热物理研究所,博士后
  • 1999-12 至 2000-02,中国科学院工程热物理研究所,副研究员
  • 2003-03 至 2004-09,伦敦大学女王学院,科研
  • 2004-10 至 2006-08,英国南安普敦大学,教学与科研
  • 2006-08 至 今,华东理工大学,教授

横向项目

项目名称学科门类名称立项年份
气刀出口冲击射流的旋涡动力学与压力脉动特性的研究科技类2023-11-01
B08气刀流场均匀性与流动稳定性的研究科技类2023-10-01
C308 炉鼻子内锌蒸汽生成与炉内锌灰去除过程的CFD 模拟科技类2022-08-31
流场分析、温度梯度分布分析和应力计算科技类2018-04-16
锌液泵内部流场分析与结构优化科技类2016-09-30
炉鼻子内保护气体运动规律模拟及体外循环参数辅助校核计算科技类2016-03-04
热镀锌机组锌锅温度场数值分析科技类2013-05-06
直接火焰加热燃烧机理研究科技类2011-03-15
乐普膜壳及侧口选型排列参考软件设计科技类2009-12-10
显示更多